Cat# Proname Name Brand Price
mach-1多功能多尺度动态力学分析系统，dynamic mechanical analysis systembiomomentum李先生
BioTester an investigation of regional variations in the biaxial mechanical properties and stress relaxation behaviors of porcine atrioventricular heart valve leaflets strain effects on collagen proteolysis in heart valve tissues comparison of biomechanical properties and microstructure of trabeculae carneae, papillary muscles, and myocardium in the human heart rate-dependency of the mechanical behavior of semilunar heart valves under biaxial deformation an investigation of layer-specific tissue biomechanics of porcine atrioventricular valve anterior leaflets the degradation and performance of electrospun supramolecular vascular scaffolds examined upon in vitro enzymatic exposure mechanical damage characterization in human femoropopliteal arteries of different ages cyclic strain affects macrophage cytokine secretion and extracellular matrix turnover in electrospun scaffolds image-based analysis of uniaxial ring test for mechanical characterization of soft materials and biological tissues mechanical properties of autologous pericardium change with fixation time: implications for valve reconstruction tissue level mechanical properties and extracellular matrix investigation of the bovine jugular venous valve tissue regional biaxial mechanical data of the mitral and tricuspid valve anterior leaflets mechanics of the tricuspid valve-from clinical diagnosis/treatment, in-vivo and in-vitro investigations, to patient-specific biomechanical modeling. an investigation of the glycosaminoglycan contribution to biaxial mechanical behaviours of porcine atrioventricular heart valve leaflets macrophage-driven biomaterial degradation depends on scaffold microarchitecture the effect of axial torsion on the mechanical properties of the annulus fibrosus integration of polarized spatial frequency domain imaging (psfdi) with a biaxial mechanical testing system for dynamic quantification of collagen architecture in soft collagenous tissues an integrated opto-mechanical system for quantification of dynamic microstructure and mechanics of heart valve tissues effects of longitudinal pre-stretch on the mechanics of human aorta before and after thoracic endovascular aortic repair (tevar) in trauma patients human in vitro model of material-driven vascular regeneration reveals how cyclic stretch and shear stress differentially modulate inflammation and tissue formation some effects of different constitutive laws on fsi simulation for the mitral valve biomechanical restoration potential of pentagalloyl glucose after arterial extracellular matrix degeneration an investigation of the effect of freezing storage on the biaxial mechanical properties of excised porcine tricuspid valve anterior leaflets a detailed mechanical and microstructural analysis of the ovine tricuspid valve leaflets the regional-dependent biaxial behavior of young and aged mouse skin: a detailed histomechanical characterization, residual strain analysis, and constitutive model biaxial mechanical behavior of bovine saphenous venous valve leaflets prevalence of calcification in human femoropopliteal arteries and its association with demographics, risk factors, and arterial stiffness comparison of corneal biomechanics after myopic small-incision lenticule extraction compared to lasik: an ex vivo study dehiscence of patch augmentation of a left-sided atrioventricular valve related to strenuous isometric exercise: case report and failure analysis puncturing of lyophilized tissue engineered vascular matrices enhances the efficiency of their recellularization biomechanical evaluation of a personalized external aortic root support applied in the ross procedure polydopamine as sizing on carbon fiber surfaces for enhancement of epoxy laminated composites comparison of in vivo vs. ex situ obtained material properties of sheep common carotid artery soy protein/cellulose nanofiber scaffolds mimicking skin extracellular matrix for enhanced wound healing new findings confirm the viscoelastic behaviour of the inter-lamellar matrix of the disc annulus fibrosus in radial and circumferential directions of loading 3d printed, controlled release, tritherapeutic tablet matrix for advanced anti-hiv-1 drug delivery computational modeling guides tissue-engineered heart valve design for long-term in vivo performance in a translational sheep model pressure-induced end-plate fracture in the porcine spine: is the annulus fibrosus susceptible to damage? dual electrospun supramolecular polymer systems for selective cell migration regional mechanical and biochemical properties of the porcine cortical meninges new insights into the viscoelastic and failure mechanical properties of the elastic fiber network of the inter-lamellar matrix in the annulus fibrosus of the disc initial scaffold thickness affects the emergence of a geometrical and mechanical equilibrium in engineered cardiovascular tissues development of an improved parameter fitting method for planar biaxial testing using rakes the biomechanics of the inter-lamellar matrix and the lamellae during progression to lumbar disc herniation: which is the weakest structure? mechanically robust cryogels with injectability and bioprinting supportability for adipose tissue engineering biomechanical characterization of human dura mater 3d printed, pva–paa hydrogel loaded-polycaprolactone scaffold for the delivery of hydrophilic in-situ formed sodium indomethacin a transverse isotropic constitutive model for the aortic valve tissue incorporating rate-dependency and fibre dispersion: application to biaxial deformation decoupling the effect of shear stress and stretch on tissue growth and remodeling in a vascular graft an investigation of the anisotropic mechanical properties and anatomical structure of porcine atrioventricular heart valves biaxial mechanical data of porcine atrioventricular valve leaflets biaxial mechanical characterization of atrioventricular heart valves biaxial experimental and analytical characterization of a dielectric elastomer biaxial mechanical properties of bovine jugular venous valve leaflet tissues comparison of femoropopliteal artery stents under axial and radial compression, axial tension, bending, and torsion deformations constitutive modeling of human femoropopliteal artery biaxial stiffening due to aging and diabetes constitutive modeling of jugular vein-derived venous valve leaflet tissues design and characterization of a hyperelastic tubular soft composite in situ heart valve tissue engineering using a bioresorbable elastomeric implant – from material design to 12 months follow-up in sheep jetvalve: rapid manufacturing of biohybrid scaffolds for biomimetic heart valve replacement limb flexion-induced twist and associated intramural stresses in the human femoropopliteal artery mechanically robust electrospun hydrogel scaffolds crosslinked via supramolecular interactions nondestructive mechanical characterization of developing biological tissues using inflation testing on the influence of wall calcification and intraluminal thrombus on prediction of abdominal aortic aneurysm rupture paraspinal muscle passive stiffness remodels in direct response to spine stiffness: a study using the ent1-deficient mouse tensile behaviour of individual fibre bundles in the human lumbar anulus fibrosus urinary bladder versus gastrointestinal tissue: a comparative study of their biomechanical properties for urinary tract reconstruction a comparison between porcine, ovine, and bovine intervertebral disc anatomy and single lamella annulus fibrosis tensile properties acute pergolide exposure stiffens engineered valve interstitial cell tissues and reduces contractility in vitro age-dependent changes in geometry, tissue composition and mechanical properties of fetal to adult cryopreserved human heart valves are adipose-derived stem cells cultivated in human platelet lysate suitable for heart valve tissue engineering biaxial quantification of deep layer transverse carpal ligament elastic properties by sex and region biomechanical characterization of ascending aortic aneurysms biomechanical properties and microstructure of heart chambers: a paired comparison study in an ovine model characterization of three-dimensional anisotropic heart valve tissue mechanical properties using inverse finite element analysis constitutive description of human femoropopliteal artery aging deposition of a hydrophilic nanocomposite-based coating on a silicone hydrogel through a laser process to minimize uv exposure and bacterial contamination improved geometry of decellularized tissue engineered heart valves to prevent leaflet retraction inflation and bi-axial tensile testing of healthy porcine carotid arteries modulation of collaen fiber orientation by strain-controlled enzymatic degradation nanocomposited coatings produced by laser-assisted process to prevent silicone hydrogels from protein fouling and bacterial contamination patient specific vascular benchtop models for development and validation of medical devices for minimally invasive procedures peak stress in the annulus fibrosis under cyclic biaxial tensile loading phototactic guidance of a tissue-engineered soft-robotic ray planar biaxial testing of heart valve cusp replacement biomaterials: experiments, theory and material constants planar biaxial testing of soft biological tissue using rakes: a critical analysis of protocol and fitting process production of synthetic, para-aramid and biopolymer nanofibers by immersion rotary jet-spinning quantification of coupled stiffness and fiber orientation remodeling in hypertensive rat right-ventricular myocardium using 3d ultrasound speckle tracking with biaxial testing the aging disc: using an ovine model to examine age-related differences in the biomechanical properties of the intralamellar matrix of single lamellae the choice of a constitutive formulation for modeling limb flexion-induced deformations and stresses in the human femoropopliteal arteries of different ages the effect of local hydration environment on the mechanical properties and unloaded temporal changes of isolated porcine annular samples adipose derived tissue engineered heart valve biaxial stress relaxation of semilunar heart valve leaflets during simulated collagen catabolism: effects of collagenase concentration and equibiaxial strain state building a better infarct: modulation of collagen cross-linking to increase infarct stiffness and reduce left ventricular dilation post-myocardial infarction corneal collagen cross-linking combined with simulation of femtosecond laser-assisted refractive lens extraction: an ex vivo biomechanical effect evaluation development of non-cell adhesive vascular grafts using supramolecular building blocks high-irradiance cxl combined with myopic lasik: flap and residual stroma biomechanical properties studied ex-vivo leaflet stress and strain distributions following incomplete transcatheter aortic valve expansion methods for using 3-d ultrasound speckle tracking in biaxial mechanical testing of biological tissue samples nanocomposite silicone hydrogels with a laser-assisted surface modification for inhibiting the growth of baterial biofilm regional and depth variability of porcine meniscal mechanical properties through biaxial testing superior tissue evolution in slow degrading scaffolds for valvular tissue engineering the biomechanics of eyelid tarsus tissue cardiac function of the naked mole-rat: echophysiological responses to working underground directional biomechanical properties of porcine skin tissue modeling the impact of scaffold architecture and mechanical loading on collagen turnover in engineered cardiovascular tissues should a native depth-dependent distribution of human meniscus constitutive components be considered in fea-models of the knee joint? strain-dependent modulation of macrophage polarization within scaffolds structural and mechanical adaptations of right ventrical free wall myocardium to pressure overload the biaxial biomechanical behavior of adominal aortic aneurysm tissue the biaxial mechanical behaviour of abdominal aortic aneurysm intraluminal thrombus: classification of morphology and the determination of layer and region specific properties the impact of long term freezing on the mechanical properties of porcine aortic tissue vascular elastography: a validation study a nanocomposite contact lens for the delivery of hydrophilic protein drugs comparison of methods used to measure the thickness of soft tissues and their influence on the evaluation of tensile stress corneal resistance to shear force after uva-riboflavin cross-linking in vitro fabrication of autologous living tissue-engineered vascular grafts based on prenatally harvested ovine amniotic fluid-derived stem cells mechanical analysis of ovine and pediatric pulmonary artery for heart valve stent design mechanics of the pulmonary valve in the aortic position reduction of stromal swelling pressure after uva-riboflavin cross-linking a murine experimental model for the mechanical behavior of viable right-ventricular myocardium an examination of the mechanical properties of the annulus fibrosus: the effect of vibration on the intra-lamellar matrix strength application of simple biomechanical and biochemical tests to heart valve leaflets: implications for heart valve characterization and tissue engineering biomechanical properties of the transverse carpal ligament under biaxial strain multi-scale mechanical characterization of scaffolds for heart valve tissue engineering a comparison of uniaxial and biaxial mechanical properties of the annulus fibrosus: a porcine model does vibration influence the initiation of intervertebral disc herniation novel lap test determines the mechanics of delamination between annular lamellae of the intervertebral disc surfactant assisted incorporation of single-walled carbon nanotubes into a chitosan-polyvinylpyrrolidone polymer an examination of the influence of strain rate on subfailure mechanical properties of the annulus fibrosus biaxial mechanical testing of human sclera effects of sclera stiffness on biomechanics of the optic nerve head in glaucoma effects of sclera stiffness properties on optic nerve head biomechanics fabrication of nanofiber reinforced protein structures for tissue engineering strain uniformity in biaxial specimens is highly sensitive to attachment details the influence of the tensile material properties of single annulus fibrosus lamellae and the interlamellar matrix strength on disc herniation and progression functional arrays of human pluripotent stem cell-derived cardiac microtissuescellscale 李先生
BioTester an investigation of regional variations in the biaxial mechanical properties and stress relaxation behaviors of porcine atrioventricular heart valve leaflets, strain effects on collagen proteolysis in heart valve tissues, comparison of biomechanical properties and microstructure of trabeculae carneae, papillary muscles, and myocardium in the human heart, rate-dependency of the mechanical behavior of semilunar heart valves under biaxial deformation, an investigation of layer-specific tissue biomechanics of porcine atrioventricular valve anterior leaflets, the degradation and performance of electrospun supramolecular vascular scaffolds examined upon in vitro enzymatic exposure, mechanical damage characterization in human femoropopliteal arteries of different ages, cyclic strain affects macrophage cytokine secretion and extracellular matrix turnover in electrospun scaffolds, image-based analysis of uniaxial ring test for mechanical characterization of soft materials and biological tissues, mechanical properties of autologous pericardium change with fixation time: implications for valve reconstruction, tissue level mechanical properties and extracellular matrix investigation of the bovine jugular venous valve tissue, regional biaxial mechanical data of the mitral and tricuspid valve anterior leaflets, mechanics of the tricuspid valve-from clinical diagnosis/treatment, in-vivo and in-vitro investigations, to patient-specific biomechanical modeling., an investigation of the glycosaminoglycan contribution to biaxial mechanical behaviours of porcine atrioventricular heart valve leaflets, macrophage-driven biomaterial degradation depends on scaffold microarchitecture, the effect of axial torsion on the mechanical properties of the annulus fibrosus, integration of polarized spatial frequency domain imaging (psfdi) with a biaxial mechanical testing system for dynamic quantification of collagen architecture in soft collagenous tissues, an integrated opto-mechanical system for quantification of dynamic microstructure and mechanics of heart valve tissues, effects of longitudinal pre-stretch on the mechanics of human aorta before and after thoracic endovascular aortic repair (tevar) in trauma patients, human in vitro model of material-driven vascular regeneration reveals how cyclic stretch and shear stress differentially modulate inflammation and tissue formation, some effects of different constitutive laws on fsi simulation for the mitral valve, biomechanical restoration potential of pentagalloyl glucose after arterial extracellular matrix degeneration, an investigation of the effect of freezing storage on the biaxial mechanical properties of excised porcine tricuspid valve anterior leaflets, a detailed mechanical and microstructural analysis of the ovine tricuspid valve leaflets, the regional-dependent biaxial behavior of young and aged mouse skin: a detailed histomechanical characterization, residual strain analysis, and constitutive model, biaxial mechanical behavior of bovine saphenous venous valve leaflets, prevalence of calcification in human femoropopliteal arteries and its association with demographics, risk factors, and arterial stiffness, comparison of corneal biomechanics after myopic small-incision lenticule extraction compared to lasik: an ex vivo study, dehiscence of patch augmentation of a left-sided atrioventricular valve related to strenuous isometric exercise: case report and failure analysis, puncturing of lyophilized tissue engineered vascular matrices enhances the efficiency of their recellularization, biomechanical evaluation of a personalized external aortic root support applied in the ross procedure, polydopamine as sizing on carbon fiber surfaces for enhancement of epoxy laminated composites, comparison of in vivo vs. ex situ obtained material properties of sheep common carotid artery, soy protein/cellulose nanofiber scaffolds mimicking skin extracellular matrix for enhanced wound healing, new findings confirm the viscoelastic behaviour of the inter-lamellar matrix of the disc annulus fibrosus in radial and circumferential directions of loading, 3d printed, controlled release, tritherapeutic tablet matrix for advanced anti-hiv-1 drug delivery, computational modeling guides tissue-engineered heart valve design for long-term in vivo performance in a translational sheep model, pressure-induced end-plate fracture in the porcine spine: is the annulus fibrosus susceptible to damage?, dual electrospun supramolecular polymer systems for selective cell migration, regional mechanical and biochemical properties of the porcine cortical meninges, new insights into the viscoelastic and failure mechanical properties of the elastic fiber network of the inter-lamellar matrix in the annulus fibrosus of the disc, initial scaffold thickness affects the emergence of a geometrical and mechanical equilibrium in engineered cardiovascular tissues, development of an improved parameter fitting method for planar biaxial testing using rakes, the biomechanics of the inter-lamellar matrix and the lamellae during progression to lumbar disc herniation: which is the weakest structure?, mechanically robust cryogels with injectability and bioprinting supportability for adipose tissue engineering, biomechanical characterization of human dura mater, 3d printed, pva–paa hydrogel loaded-polycaprolactone scaffold for the delivery of hydrophilic in-situ formed sodium indomethacin, a transverse isotropic constitutive model for the aortic valve tissue incorporating rate-dependency and fibre dispersion: application to biaxial deformation, decoupling the effect of shear stress and stretch on tissue growth and remodeling in a vascular graft, an investigation of the anisotropic mechanical properties and anatomical structure of porcine atrioventricular heart valves, biaxial mechanical data of porcine atrioventricular valve leaflets, biaxial mechanical characterization of atrioventricular heart valves, biaxial experimental and analytical characterization of a dielectric elastomer, biaxial mechanical properties of bovine jugular venous valve leaflet tissues, comparison of femoropopliteal artery stents under axial and radial compression, axial tension, bending, and torsion deformations, constitutive modeling of human femoropopliteal artery biaxial stiffening due to aging and diabetes, constitutive modeling of jugular vein-derived venous valve leaflet tissues, design and characterization of a hyperelastic tubular soft composite, in situ heart valve tissue engineering using a bioresorbable elastomeric implant – from material design to 12 months follow-up in sheep, jetvalve: rapid manufacturing of biohybrid scaffolds for biomimetic heart valve replacement, limb flexion-induced twist and associated intramural stresses in the human femoropopliteal artery, mechanically robust electrospun hydrogel scaffolds crosslinked via supramolecular interactions, nondestructive mechanical characterization of developing biological tissues using inflation testing, on the influence of wall calcification and intraluminal thrombus on prediction of abdominal aortic aneurysm rupture, paraspinal muscle passive stiffness remodels in direct response to spine stiffness: a study using the ent1-deficient mouse, tensile behaviour of individual fibre bundles in the human lumbar anulus fibrosus, urinary bladder versus gastrointestinal tissue: a comparative study of their biomechanical properties for urinary tract reconstruction, a comparison between porcine, ovine, and bovine intervertebral disc anatomy and single lamella annulus fibrosis tensile properties, acute pergolide exposure stiffens engineered valve interstitial cell tissues and reduces contractility in vitro, age-dependent changes in geometry, tissue composition and mechanical properties of fetal to adult cryopreserved human heart valves, are adipose-derived stem cells cultivated in human platelet lysate suitable for heart valve tissue engineering, biaxial quantification of deep layer transverse carpal ligament elastic properties by sex and region, biomechanical characterization of ascending aortic aneurysms, biomechanical properties and microstructure of heart chambers: a paired comparison study in an ovine model, characterization of three-dimensional anisotropic heart valve tissue mechanical properties using inverse finite element analysis, constitutive description of human femoropopliteal artery aging, deposition of a hydrophilic nanocomposite-based coating on a silicone hydrogel through a laser process to minimize uv exposure and bacterial contamination, improved geometry of decellularized tissue engineered heart valves to prevent leaflet retraction, inflation and bi-axial tensile testing of healthy porcine carotid arteries, modulation of collaen fiber orientation by strain-controlled enzymatic degradation, nanocomposited coatings produced by laser-assisted process to prevent silicone hydrogels from protein fouling and bacterial contamination, patient specific vascular benchtop models for development and validation of medical devices for minimally invasive procedures, peak stress in the annulus fibrosis under cyclic biaxial tensile loading, phototactic guidance of a tissue-engineered soft-robotic ray, planar biaxial testing of heart valve cusp replacement biomaterials: experiments, theory and material constants, planar biaxial testing of soft biological tissue using rakes: a critical analysis of protocol and fitting process, production of synthetic, para-aramid and biopolymer nanofibers by immersion rotary jet-spinning, quantification of coupled stiffness and fiber orientation remodeling in hypertensive rat right-ventricular myocardium using 3d ultrasound speckle tracking with biaxial testing, the aging disc: using an ovine model to examine age-related differences in the biomechanical properties of the intralamellar matrix of single lamellae, the choice of a constitutive formulation for modeling limb flexion-induced deformations and stresses in the human femoropopliteal arteries of different ages, the effect of local hydration environment on the mechanical properties and unloaded temporal changes of isolated porcine annular samples, adipose derived tissue engineered heart valve, biaxial stress relaxation of semilunar heart valve leaflets during simulated collagen catabolism: effects of collagenase concentration and equibiaxial strain state, building a better infarct: modulation of collagen cross-linking to increase infarct stiffness and reduce left ventricular dilation post-myocardial infarction, corneal collagen cross-linking combined with simulation of femtosecond laser-assisted refractive lens extraction: an ex vivo biomechanical effect evaluation, development of non-cell adhesive vascular grafts using supramolecular building blocks, high-irradiance cxl combined with myopic lasik: flap and residual stroma biomechanical properties studied ex-vivo, leaflet stress and strain distributions following incomplete transcatheter aortic valve expansion, methods for using 3-d ultrasound speckle tracking in biaxial mechanical testing of biological tissue samples, nanocomposite silicone hydrogels with a laser-assisted surface modification for inhibiting the growth of baterial biofilm, regional and depth variability of porcine meniscal mechanical properties through biaxial testing, superior tissue evolution in slow degrading scaffolds for valvular tissue engineering, the biomechanics of eyelid tarsus tissue, cardiac function of the naked mole-rat: echophysiological responses to working underground, directional biomechanical properties of porcine skin tissue, modeling the impact of scaffold architecture and mechanical loading on collagen turnover in engineered cardiovascular tissues, should a native depth-dependent distribution of human meniscus constitutive components be considered in fea-models of the knee joint?, strain-dependent modulation of macrophage polarization within scaffolds, structural and mechanical adaptations of right ventrical free wall myocardium to pressure overload, the biaxial biomechanical behavior of adominal aortic aneurysm tissue, the biaxial mechanical behaviour of abdominal aortic aneurysm intraluminal thrombus: classification of morphology and the determination of layer and region specific properties, the impact of long term freezing on the mechanical properties of porcine aortic tissue, vascular elastography: a validation study, a nanocomposite contact lens for the delivery of hydrophilic protein drugs, comparison of methods used to measure the thickness of soft tissues and their influence on the evaluation of tensile stress, corneal resistance to shear force after uva-riboflavin cross-linking, in vitro fabrication of autologous living tissue-engineered vascular grafts based on prenatally harvested ovine amniotic fluid-derived stem cells, mechanical analysis of ovine and pediatric pulmonary artery for heart valve stent design, mechanics of the pulmonary valve in the aortic position, reduction of stromal swelling pressure after uva-riboflavin cross-linking, a murine experimental model for the mechanical behavior of viable right-ventricular myocardium, an examination of the mechanical properties of the annulus fibrosus: the effect of vibration on the intra-lamellar matrix strength, application of simple biomechanical and biochemical tests to heart valve leaflets: implications for heart valve characterization and tissue engineering, biomechanical properties of the transverse carpal ligament under biaxial strain, multi-scale mechanical characterization of scaffolds for heart valve tissue engineering, a comparison of uniaxial and biaxial mechanical properties of the annulus fibrosus: a porcine model, does vibration influence the initiation of intervertebral disc herniation, novel lap test determines the mechanics of delamination between annular lamellae of the intervertebral disc, surfactant assisted incorporation of single-walled carbon nanotubes into a chitosan-polyvinylpyrrolidone polymer, an examination of the influence of strain rate on subfailure mechanical properties of the annulus fibrosus, biaxial mechanical testing of human sclera, effects of sclera stiffness on biomechanics of the optic nerve head in glaucoma, effects of sclera stiffness properties on optic nerve head biomechanics, fabrication of nanofiber reinforced protein structures for tissue engineering, strain uniformity in biaxial specimens is highly sensitive to attachment details, the influence of the tensile material properties of single annulus fibrosus lamellae and the interlamellar matrix strength on disc herniation and progression, functional arrays of human pluripotent stem cell-derived cardiac microtissues,acellscale 李先生
BioTester an investigation of regional variations in the biaxial mechanical properties and stress relaxation behaviors of porcine atrioventricular heart valve leaflets, strain effects on collagen proteolysis in heart valve tissues, comparison of biomechanical properties and microstructure of trabeculae carneae, papillary muscles, and myocardium in the human heart, rate-dependency of the mechanical behavior of semilunar heart valves under biaxial deformation, an investigation of layer-specific tissue biomechanics of porcine atrioventricular valve anterior leaflets, the degradation and performance of electrospun supramolecular vascular scaffolds examined upon in vitro enzymatic exposure, mechanical damage characterization in human femoropopliteal arteries of different ages, cyclic strain affects macrophage cytokine secretion and extracellular matrix turnover in electrospun scaffolds, image-based analysis of uniaxial ring test for mechanical characterization of soft materials and biological tissues, mechanical properties of autologous pericardium change with fixation time: implications for valve reconstruction, tissue level mechanical properties and extracellular matrix investigation of the bovine jugular venous valve tissue, regional biaxial mechanical data of the mitral and tricuspid valve anterior leaflets, mechanics of the tricuspid valve-from clinical diagnosis/treatment, in-vivo and in-vitro investigations, to patient-specific biomechanical modeling., an investigation of the glycosaminoglycan contribution to biaxial mechanical behaviours of porcine atrioventricular heart valve leaflets, macrophage-driven biomaterial degradation depends on scaffold microarchitecture, the effect of axial torsion on the mechanical properties of the annulus fibrosus, integration of polarized spatial frequency domain imaging (psfdi) with a biaxial mechanical testing system for dynamic quantification of collagen architecture in soft collagenous tissues, an integrated opto-mechanical system for quantification of dynamic microstructure and mechanics of heart valve tissues, effects of longitudinal pre-stretch on the mechanics of human aorta before and after thoracic endovascular aortic repair (tevar) in trauma patients, human in vitro model of material-driven vascular regeneration reveals how cyclic stretch and shear stress differentially modulate inflammation and tissue formation, some effects of different constitutive laws on fsi simulation for the mitral valve, biomechanical restoration potential of pentagalloyl glucose after arterial extracellular matrix degeneration, an investigation of the effect of freezing storage on the biaxial mechanical properties of excised porcine tricuspid valve anterior leaflets, a detailed mechanical and microstructural analysis of the ovine tricuspid valve leaflets, the regional-dependent biaxial behavior of young and aged mouse skin: a detailed histomechanical characterization, residual strain analysis, and constitutive model, biaxial mechanical behavior of bovine saphenous venous valve leaflets, prevalence of calcification in human femoropopliteal arteries and its association with demographics, risk factors, and arterial stiffness, comparison of corneal biomechanics after myopic small-incision lenticule extraction compared to lasik: an ex vivo study, dehiscence of patch augmentation of a left-sided atrioventricular valve related to strenuous isometric exercise: case report and failure analysis, puncturing of lyophilized tissue engineered vascular matrices enhances the efficiency of their recellularization, biomechanical evaluation of a personalized external aortic root support applied in the ross procedure, polydopamine as sizing on carbon fiber surfaces for enhancement of epoxy laminated composites, comparison of in vivo vs. ex situ obtained material properties of sheep common carotid artery, soy protein/cellulose nanofiber scaffolds mimicking skin extracellular matrix for enhanced wound healing, new findings confirm the viscoelastic behaviour of the inter-lamellar matrix of the disc annulus fibrosus in radial and circumferential directions of loading, 3d printed, controlled release, tritherapeutic tablet matrix for advanced anti-hiv-1 drug delivery, computational modeling guides tissue-engineered heart valve design for long-term in vivo performance in a translational sheep model, pressure-induced end-plate fracture in the porcine spine: is the annulus fibrosus susceptible to damage?, dual electrospun supramolecular polymer systems for selective cell migration, regional mechanical and biochemical properties of the porcine cortical meninges, new insights into the viscoelastic and failure mechanical properties of the elastic fiber network of the inter-lamellar matrix in the annulus fibrosus of the disc, initial scaffold thickness affects the emergence of a geometrical and mechanical equilibrium in engineered cardiovascular tissues, development of an improved parameter fitting method for planar biaxial testing using rakes, the biomechanics of the inter-lamellar matrix and the lamellae during progression to lumbar disc herniation: which is the weakest structure?, mechanically robust cryogels with injectability and bioprinting supportability for adipose tissue engineering, biomechanical characterization of human dura mater, 3d printed, pva–paa hydrogel loaded-polycaprolactone scaffold for the delivery of hydrophilic in-situ formed sodium indomethacin, a transverse isotropic constitutive model for the aortic valve tissue incorporating rate-dependency and fibre dispersion: application to biaxial deformation, decoupling the effect of shear stress and stretch on tissue growth and remodeling in a vascular graft, an investigation of the anisotropic mechanical properties and anatomical structure of porcine atrioventricular heart valves, biaxial mechanical data of porcine atrioventricular valve leaflets, biaxial mechanical characterization of atrioventricular heart valves, biaxial experimental and analytical characterization of a dielectric elastomer, biaxial mechanical properties of bovine jugular venous valve leaflet tissues, comparison of femoropopliteal artery stents under axial and radial compression, axial tension, bending, and torsion deformations, constitutive modeling of human femoropopliteal artery biaxial stiffening due to aging and diabetes, constitutive modeling of jugular vein-derived venous valve leaflet tissues, design and characterization of a hyperelastic tubular soft composite, in situ heart valve tissue engineering using a bioresorbable elastomeric implant – from material design to 12 months follow-up in sheep, jetvalve: rapid manufacturing of biohybrid scaffolds for biomimetic heart valve replacement, limb flexion-induced twist and associated intramural stresses in the human femoropopliteal artery, mechanically robust electrospun hydrogel scaffolds crosslinked via supramolecular interactions, nondestructive mechanical characterization of developing biological tissues using inflation testing, on the influence of wall calcification and intraluminal thrombus on prediction of abdominal aortic aneurysm rupture, paraspinal muscle passive stiffness remodels in direct response to spine stiffness: a study using the ent1-deficient mouse, tensile behaviour of individual fibre bundles in the human lumbar anulus fibrosus, urinary bladder versus gastrointestinal tissue: a comparative study of their biomechanical properties for urinary tract reconstruction, a comparison between porcine, ovine, and bovine intervertebral disc anatomy and single lamella annulus fibrosis tensile properties, acute pergolide exposure stiffens engineered valve interstitial cell tissues and reduces contractility in vitro, age-dependent changes in geometry, tissue composition and mechanical properties of fetal to adult cryopreserved human heart valves, are adipose-derived stem cells cultivated in human platelet lysate suitable for heart valve tissue engineering, biaxial quantification of deep layer transverse carpal ligament elastic properties by sex and region, biomechanical characterization of ascending aortic aneurysms, biomechanical properties and microstructure of heart chambers: a paired comparison study in an ovine model, characterization of three-dimensional anisotropic heart valve tissue mechanical properties using inverse finite element analysis, constitutive description of human femoropopliteal artery aging, deposition of a hydrophilic nanocomposite-based coating on a silicone hydrogel through a laser process to minimize uv exposure and bacterial contamination, improved geometry of decellularized tissue engineered heart valves to prevent leaflet retraction, inflation and bi-axial tensile testing of healthy porcine carotid arteries, modulation of collaen fiber orientation by strain-controlled enzymatic degradation, nanocomposited coatings produced by laser-assisted process to prevent silicone hydrogels from protein fouling and bacterial contamination, patient specific vascular benchtop models for development and validation of medical devices for minimally invasive procedures, peak stress in the annulus fibrosis under cyclic biaxial tensile loading, phototactic guidance of a tissue-engineered soft-robotic ray, planar biaxial testing of heart valve cusp replacement biomaterials: experiments, theory and material constants, planar biaxial testing of soft biological tissue using rakes: a critical analysis of protocol and fitting process, production of synthetic, para-aramid and biopolymer nanofibers by immersion rotary jet-spinning, quantification of coupled stiffness and fiber orientation remodeling in hypertensive rat right-ventricular myocardium using 3d ultrasound speckle tracking with biaxial testing, the aging disc: using an ovine model to examine age-related differences in the biomechanical properties of the intralamellar matrix of single lamellae, the choice of a constitutive formulation for modeling limb flexion-induced deformations and stresses in the human femoropopliteal arteries of different ages, the effect of local hydration environment on the mechanical properties and unloaded temporal changes of isolated porcine annular samples, adipose derived tissue engineered heart valve, biaxial stress relaxation of semilunar heart valve leaflets during simulated collagen catabolism: effects of collagenase concentration and equibiaxial strain state, building a better infarct: modulation of collagen cross-linking to increase infarct stiffness and reduce left ventricular dilation post-myocardial infarction, corneal collagen cross-linking combined with simulation of femtosecond laser-assisted refractive lens extraction: an ex vivo biomechanical effect evaluation, development of non-cell adhesive vascular grafts using supramolecular building blocks, high-irradiance cxl combined with myopic lasik: flap and residual stroma biomechanical properties studied ex-vivo, leaflet stress and strain distributions following incomplete transcatheter aortic valve expansion, methods for using 3-d ultrasound speckle tracking in biaxial mechanical testing of biological tissue samples, nanocomposite silicone hydrogels with a laser-assisted surface modification for inhibiting the growth of baterial biofilm, regional and depth variability of porcine meniscal mechanical properties through biaxial testing, superior tissue evolution in slow degrading scaffolds for valvular tissue engineering, the biomechanics of eyelid tarsus tissue, cardiac function of the naked mole-rat: echophysiological responses to working underground, directional biomechanical properties of porcine skin tissue, modeling the impact of scaffold architecture and mechanical loading on collagen turnover in engineered cardiovascular tissues, should a native depth-dependent distribution of human meniscus constitutive components be considered in fea-models of the knee joint?, strain-dependent modulation of macrophage polarization within scaffolds, structural and mechanical adaptations of right ventrical free wall myocardium to pressure overload, the biaxial biomechanical behavior of adominal aortic aneurysm tissue, the biaxial mechanical behaviour of abdominal aortic aneurysm intraluminal thrombus: classification of morphology and the determination of layer and region specific properties, the impact of long term freezing on the mechanical properties of porcine aortic tissue, vascular elastography: a validation study, a nanocomposite contact lens for the delivery of hydrophilic protein drugs, comparison of methods used to measure the thickness of soft tissues and their influence on the evaluation of tensile stress, corneal resistance to shear force after uva-riboflavin cross-linking, in vitro fabrication of autologous living tissue-engineered vascular grafts based on prenatally harvested ovine amniotic fluid-derived stem cells, mechanical analysis of ovine and pediatric pulmonary artery for heart valve stent design, mechanics of the pulmonary valve in the aortic position, reduction of stromal swelling pressure after uva-riboflavin cross-linking, a murine experimental model for the mechanical behavior of viable right-ventricular myocardium, an examination of the mechanical properties of the annulus fibrosus: the effect of vibration on the intra-lamellar matrix strength, application of simple biomechanical and biochemical tests to heart valve leaflets: implications for heart valve characterization and tissue engineering, biomechanical properties of the transverse carpal ligament under biaxial strain, multi-scale mechanical characterization of scaffolds for heart valve tissue engineering, a comparison of uniaxial and biaxial mechanical properties of the annulus fibrosus: a porcine model, does vibration influence the initiation of intervertebral disc herniation, novel lap test determines the mechanics of delamination between annular lamellae of the intervertebral disc, surfactant assisted incorporation of single-walled carbon nanotubes into a chitosan-polyvinylpyrrolidone polymer, an examination of the influence of strain rate on subfailure mechanical properties of the annulus fibrosus, biaxial mechanical testing of human sclera, effects of sclera stiffness on biomechanics of the optic nerve head in glaucoma, effects of sclera stiffness properties on optic nerve head biomechanics, fabrication of nanofiber reinforced protein structures for tissue engineering, strain uniformity in biaxial specimens is highly sensitive to attachment details, the influence of the tensile material properties of single annulus fibrosus lamellae and the interlamellar matrix strength on disc herniation and progression, functional arrays of human pluripotent stem cell-derived cardiac microtissues,acellscale 李先生
BioTester an investigation of regional variations in the biaxial mechanical properties and stress relaxation behaviors of porcine atrioventricular heart valve leaflets, strain effects on collagen proteolysis in heart valve tissues, comparison of biomechanical properties and microstructure of trabeculae carneae, papillary muscles, and myocardium in the human heart, rate-dependency of the mechanical behavior of semilunar heart valves under biaxial deformation, an investigation of layer-specific tissue biomechanics of porcine atrioventricular valve anterior leaflets, the degradation and performance of electrospun supramolecular vascular scaffolds examined upon in vitro enzymatic exposure, mechanical damage characterization in human femoropopliteal arteries of different ages, cyclic strain affects macrophage cytokine secretion and extracellular matrix turnover in electrospun scaffolds, image-based analysis of uniaxial ring test for mechanical characterization of soft materials and biological tissues, mechanical properties of autologous pericardium change with fixation time: implications for valve reconstruction, tissue level mechanical properties and extracellular matrix investigation of the bovine jugular venous valve tissue, regional biaxial mechanical data of the mitral and tricuspid valve anterior leaflets, mechanics of the tricuspid valve-from clinical diagnosis/treatment, in-vivo and in-vitro investigations, to patient-specific biomechanical modeling., an investigation of the glycosaminoglycan contribution to biaxial mechanical behaviours of porcine atrioventricular heart valve leaflets, macrophage-driven biomaterial degradation depends on scaffold microarchitecture, the effect of axial torsion on the mechanical properties of the annulus fibrosus, integration of polarized spatial frequency domain imaging (psfdi) with a biaxial mechanical testing system for dynamic quantification of collagen architecture in soft collagenous tissues, an integrated opto-mechanical system for quantification of dynamic microstructure and mechanics of heart valve tissues, effects of longitudinal pre-stretch on the mechanics of human aorta before and after thoracic endovascular aortic repair (tevar) in trauma patients, human in vitro model of material-driven vascular regeneration reveals how cyclic stretch and shear stress differentially modulate inflammation and tissue formation, some effects of different constitutive laws on fsi simulation for the mitral valve, biomechanical restoration potential of pentagalloyl glucose after arterial extracellular matrix degeneration, an investigation of the effect of freezing storage on the biaxial mechanical properties of excised porcine tricuspid valve anterior leaflets, a detailed mechanical and microstructural analysis of the ovine tricuspid valve leaflets, the regional-dependent biaxial behavior of young and aged mouse skin: a detailed histomechanical characterization, residual strain analysis, and constitutive model, biaxial mechanical behavior of bovine saphenous venous valve leaflets, prevalence of calcification in human femoropopliteal arteries and its association with demographics, risk factors, and arterial stiffness, comparison of corneal biomechanics after myopic small-incision lenticule extraction compared to lasik: an ex vivo study, dehiscence of patch augmentation of a left-sided atrioventricular valve related to strenuous isometric exercise: case report and failure analysis, puncturing of lyophilized tissue engineered vascular matrices enhances the efficiency of their recellularization, biomechanical evaluation of a personalized external aortic root support applied in the ross procedure, polydopamine as sizing on carbon fiber surfaces for enhancement of epoxy laminated composites, comparison of in vivo vs. ex situ obtained material properties of sheep common carotid artery, soy protein/cellulose nanofiber scaffolds mimicking skin extracellular matrix for enhanced wound healing, new findings confirm the viscoelastic behaviour of the inter-lamellar matrix of the disc annulus fibrosus in radial and circumferential directions of loading, 3d printed, controlled release, tritherapeutic tablet matrix for advanced anti-hiv-1 drug delivery, computational modeling guides tissue-engineered heart valve design for long-term in vivo performance in a translational sheep model, pressure-induced end-plate fracture in the porcine spine: is the annulus fibrosus susceptible to damage?, dual electrospun supramolecular polymer systems for selective cell migration, regional mechanical and biochemical properties of the porcine cortical meninges, new insights into the viscoelastic and failure mechanical properties of the elastic fiber network of the inter-lamellar matrix in the annulus fibrosus of the disc, initial scaffold thickness affects the emergence of a geometrical and mechanical equilibrium in engineered cardiovascular tissues, development of an improved parameter fitting method for planar biaxial testing using rakes, the biomechanics of the inter-lamellar matrix and the lamellae during progression to lumbar disc herniation: which is the weakest structure?, mechanically robust cryogels with injectability and bioprinting supportability for adipose tissue engineering, biomechanical characterization of human dura mater, 3d printed, pva–paa hydrogel loaded-polycaprolactone scaffold for the delivery of hydrophilic in-situ formed sodium indomethacin, a transverse isotropic constitutive model for the aortic valve tissue incorporating rate-dependency and fibre dispersion: application to biaxial deformation, decoupling the effect of shear stress and stretch on tissue growth and remodeling in a vascular graft, an investigation of the anisotropic mechanical properties and anatomical structure of porcine atrioventricular heart valves, biaxial mechanical data of porcine atrioventricular valve leaflets, biaxial mechanical characterization of atrioventricular heart valves, biaxial experimental and analytical characterization of a dielectric elastomer, biaxial mechanical properties of bovine jugular venous valve leaflet tissues, comparison of femoropopliteal artery stents under axial and radial compression, axial tension, bending, and torsion deformations, constitutive modeling of human femoropopliteal artery biaxial stiffening due to aging and diabetes, constitutive modeling of jugular vein-derived venous valve leaflet tissues, design and characterization of a hyperelastic tubular soft composite, in situ heart valve tissue engineering using a bioresorbable elastomeric implant – from material design to 12 months follow-up in sheep, jetvalve: rapid manufacturing of biohybrid scaffolds for biomimetic heart valve replacement, limb flexion-induced twist and associated intramural stresses in the human femoropopliteal artery, mechanically robust electrospun hydrogel scaffolds crosslinked via supramolecular interactions, nondestructive mechanical characterization of developing biological tissues using inflation testing, on the influence of wall calcification and intraluminal thrombus on prediction of abdominal aortic aneurysm rupture, paraspinal muscle passive stiffness remodels in direct response to spine stiffness: a study using the ent1-deficient mouse, tensile behaviour of individual fibre bundles in the human lumbar anulus fibrosus, urinary bladder versus gastrointestinal tissue: a comparative study of their biomechanical properties for urinary tract reconstruction, a comparison between porcine, ovine, and bovine intervertebral disc anatomy and single lamella annulus fibrosis tensile properties, acute pergolide exposure stiffens engineered valve interstitial cell tissues and reduces contractility in vitro, age-dependent changes in geometry, tissue composition and mechanical properties of fetal to adult cryopreserved human heart valves, are adipose-derived stem cells cultivated in human platelet lysate suitable for heart valve tissue engineering, biaxial quantification of deep layer transverse carpal ligament elastic properties by sex and region, biomechanical characterization of ascending aortic aneurysms, biomechanical properties and microstructure of heart chambers: a paired comparison study in an ovine model, characterization of three-dimensional anisotropic heart valve tissue mechanical properties using inverse finite element analysis, constitutive description of human femoropopliteal artery aging, deposition of a hydrophilic nanocomposite-based coating on a silicone hydrogel through a laser process to minimize uv exposure and bacterial contamination, improved geometry of decellularized tissue engineered heart valves to prevent leaflet retraction, inflation and bi-axial tensile testing of healthy porcine carotid arteries, modulation of collaen fiber orientation by strain-controlled enzymatic degradation, nanocomposited coatings produced by laser-assisted process to prevent silicone hydrogels from protein fouling and bacterial contamination, patient specific vascular benchtop models for development and validation of medical devices for minimally invasive procedures, peak stress in the annulus fibrosis under cyclic biaxial tensile loading, phototactic guidance of a tissue-engineered soft-robotic ray, planar biaxial testing of heart valve cusp replacement biomaterials: experiments, theory and material constants, planar biaxial testing of soft biological tissue using rakes: a critical analysis of protocol and fitting process, production of synthetic, para-aramid and biopolymer nanofibers by immersion rotary jet-spinning, quantification of coupled stiffness and fiber orientation remodeling in hypertensive rat right-ventricular myocardium using 3d ultrasound speckle tracking with biaxial testing, the aging disc: using an ovine model to examine age-related differences in the biomechanical properties of the intralamellar matrix of single lamellae, the choice of a constitutive formulation for modeling limb flexion-induced deformations and stresses in the human femoropopliteal arteries of different ages, the effect of local hydration environment on the mechanical properties and unloaded temporal changes of isolated porcine annular samples, adipose derived tissue engineered heart valve, biaxial stress relaxation of semilunar heart valve leaflets during simulated collagen catabolism: effects of collagenase concentration and equibiaxial strain state, building a better infarct: modulation of collagen cross-linking to increase infarct stiffness and reduce left ventricular dilation post-myocardial infarction, corneal collagen cross-linking combined with simulation of femtosecond laser-assisted refractive lens extraction: an ex vivo biomechanical effect evaluation, development of non-cell adhesive vascular grafts using supramolecular building blocks, high-irradiance cxl combined with myopic lasik: flap and residual stroma biomechanical properties studied ex-vivo, leaflet stress and strain distributions following incomplete transcatheter aortic valve expansion, methods for using 3-d ultrasound speckle tracking in biaxial mechanical testing of biological tissue samples, nanocomposite silicone hydrogels with a laser-assisted surface modification for inhibiting the growth of baterial biofilm, regional and depth variability of porcine meniscal mechanical properties through biaxial testing, superior tissue evolution in slow degrading scaffolds for valvular tissue engineering, the biomechanics of eyelid tarsus tissue, cardiac function of the naked mole-rat: echophysiological responses to working underground, directional biomechanical properties of porcine skin tissue, modeling the impact of scaffold architecture and mechanical loading on collagen turnover in engineered cardiovascular tissues, should a native depth-dependent distribution of human meniscus constitutive components be considered in fea-models of the knee joint?, strain-dependent modulation of macrophage polarization within scaffolds, structural and mechanical adaptations of right ventrical free wall myocardium to pressure overload, the biaxial biomechanical behavior of adominal aortic aneurysm tissue, the biaxial mechanical behaviour of abdominal aortic aneurysm intraluminal thrombus: classification of morphology and the determination of layer and region specific properties, the impact of long term freezing on the mechanical properties of porcine aortic tissue, vascular elastography: a validation study, a nanocomposite contact lens for the delivery of hydrophilic protein drugs, comparison of methods used to measure the thickness of soft tissues and their influence on the evaluation of tensile stress, corneal resistance to shear force after uva-riboflavin cross-linking, in vitro fabrication of autologous living tissue-engineered vascular grafts based on prenatally harvested ovine amniotic fluid-derived stem cells, mechanical analysis of ovine and pediatric pulmonary artery for heart valve stent design, mechanics of the pulmonary valve in the aortic position, reduction of stromal swelling pressure after uva-riboflavin cross-linking, a murine experimental model for the mechanical behavior of viable right-ventricular myocardium, an examination of the mechanical properties of the annulus fibrosus: the effect of vibration on the intra-lamellar matrix strength, application of simple biomechanical and biochemical tests to heart valve leaflets: implications for heart valve characterization and tissue engineering, biomechanical properties of the transverse carpal ligament under biaxial strain, multi-scale mechanical characterization of scaffolds for heart valve tissue engineering, a comparison of uniaxial and biaxial mechanical properties of the annulus fibrosus: a porcine model, does vibration influence the initiation of intervertebral disc herniation, novel lap test determines the mechanics of delamination between annular lamellae of the intervertebral disc, surfactant assisted incorporation of single-walled carbon nanotubes into a chitosan-polyvinylpyrrolidone polymer, an examination of the influence of strain rate on subfailure mechanical properties of the annulus fibrosus, biaxial mechanical testing of human sclera, effects of sclera stiffness on biomechanics of the optic nerve head in glaucoma, effects of sclera stiffness properties on optic nerve head biomechanics, fabrication of nanofiber reinforced protein structures for tissue engineering, strain uniformity in biaxial specimens is highly sensitive to attachment details, the influence of the tensile material properties of single annulus fibrosus lamellae and the interlamellar matrix strength on disc herniation and progression, functional arrays of human pluripotent stem cell-derived cardiac microtissues,acellscale 李先生
‘DYNAMIC’ MICROPATTERNED COVERSLIPS细胞迁移测定微图案盖玻片 “动态”微图案盖玻片, ‘dynamic' micropatterned coverslips4dcell李先生
SynBBB 3D Blood Brain Barrier Modelsynbbb 3d血脑屏障模型芯片，血脑屏障组织模型芯片，synbbb 3d blood brain barrier model,synbbb 3d model kit，synbbb 3d model – assay kits,synbbb 3d model assay kit synbbb 3d model chip,synbbb 3d model starter kitsynvivobio李先生
synvivo-kit，synvivo 3d组织器官模型，synbbb 3d血脑屏障模型，synram 3d炎症模型，syntumor 3d癌症模型，synali肺模型，syntox 3d毒理学模型，线性通道，分叉通道，微血管网络， 理想化网络芯片，synvivo-kit,3d tissue and organ-on-chip models,synbbb 3d blood brain barrier model,synram 3d inflammation model,syntumor 3d cancer model​,synali lung model,syntox 3d toxicology model,linear channels,bifurcating channels,microvascular networks,idealized networks
内详synvivo-kit，synvivo 3d组织器官模型，synbbb 3d血脑屏障模型，synram 3d炎症模型，syntumor 3d癌症模型，synali肺模型，syntox 3d毒理学模型，线性通道，分叉通道，微血管网络， 理想化网络芯片，synvivo-kit,3d tissue and organ-on-chip models,synbbb 3d blood brain barrier model,synram 3d inflammation model,syntumor 3d cancer model​,synali lung model,syntox 3d toxicology model,linear channels,bifurcating channels,microvascular networks,idealized networks美国synvivio李先生
Mach-1 mechanical tester使用biomomentum mach-1 mechanical tester，mach-1 – automated indentation mapping (ma056-sop01-d v2) sim s and quenneville e biomomentum inc. laval (qc), canada, effective date: april 7th, 2015 purpose: this procedure describes a standard method to realize an automated indentation mapping over the surface of a sample using the mach-1 mechanical tester (model v500css or v500csst, with software add-on for automated indentation... read more ma056-sop01-d v2 mach-1-automated indentation mapping.pdf mach-automated thickness mapping of an articular surface (ma056-sop02-d v2) sim s and quenneville e biomomentum inc. laval (qc), canada, effective date: april 7th, 2015 purpose: this procedure describes a standard method to realize an automated thickness mapping over the non-planar surface of articular cartilage using the mach-1 mechanical tester (model v500css or v500csst, with software add-on for... read more ma056-sop02-d v2 mach-1-automated thickness mapping of an articular surface.pdf mach-1-unconfined compression of an articular cartilage osteochondral core (ma056-sop03-d v2) sim s and quenneville e biomomentum inc. laval (qc), canada, effective date: april 7th, 2015 purpose: this procedure describes a standard method to realize unconfined compression on an osteochondral core using the mach-1 mechanical tester. scope: this procedure can be used for the ex... read more ma056-sop03-d v2 mach-1-unconfined compression of an articular cartilage osteochondral core.pdf mach-1-dynamic mechanical testing (ma056-sop04-d v1) hadjab i and quenneville e biomomentum inc. laval (qc), canada, effective date: december 3rd, 2014 purpose this document describes a standard method to assess the frequency behavior of the dynamic mechanical properties of material through the complex young's (e*) or shear (g*) modulus using the mach-1 mechanical tester.... read more ma056-sop04-d v1 mach-1-dynamic mechanical testing.pdf mach-1-unconfined compression of a disk (ma056-sop05-d v1) sim s and quenneville e biomomentum inc. laval (qc), canada, effective date: april 14th, 2015 purpose this procedure describes a standard method to realize unconfined compression on a disk-shaped sample using the mach-1tm mechanical tester. scope this procedure can be... read more ma056-sop05-d v1 mach-1-unconfined compression of a disk.pdf mach-1-confined compression of a cartilage disk (ma056-sop06-d v3) sim s and quenneville e biomomentum inc. laval (qc), canada, effective date: july 27th, 2017 purpose this procedure describes a standard method to realize confined compression of a cartilage disk using the mach-1tm mechanical tester. scope this procedure can be... read more ma056-sop06-d v3 mach-1-confined compression of a cartilage disk.pdf mach-1-shear testing on a cartilage disk or an osteochondral core (ma056-sop07-d v2) tessier j and quenneville e biomomentum inc. laval (qc), canada, effective date: august 25th, 2015 purpose this procedure describes a standard method to realize a planar or a torsion shear test on an articular cartilage disk or an osteochondral core using the mach-1tm mechanical tester. read more ma056-sop07-d v2 mach-1-shear testing on a cartilage disk or an osteochondral core.pdf mach-1-friction testing on a cartilage disk or an osteochondral core (ma056-sop08-d v2) chartrand a and quenneville e biomomentum inc. laval (qc), canada, effective date: august 24th, 2015 purpose this procedure describes a standard method to realize a friction test on a cartilage disk or an osteochondral core using the mach-1 tm mechanical tester. read more ma056-sop08-d v2 mach-1-friction testing on a cartilage disk or an osteochondral core.pdf mach-1 extraction and preparation of cartilage disks and osteochondral cores from an articular surface (ma056-sop09-d v1) sim s and quenneville e biomomentum inc. laval (qc), canada, effective date: august 25th, 2015 purpose this procedure describes a standard method to extract and prepare cartilage disks and osteochondral cores from an articular surface. scope this procedure can be used for the... read more ma056-sop09-d v1 mach-1-extraction and preparation of cartilage disks and osteochondral cores from an articular surface.pdf mach-1-extraction of articular surfaces from a closed stifle joint in large animal species (ma056-sop10-d v1) sim s and quenneville e biomomentum inc. laval (qc), canada, effective date: february 1st, 2016 purpose this procedure describes a standard method to extract articular surface from a closed stifle joint in large animals. scope this procedure can be used for the stifle joint of large... read more ma056-sop10-d v1 mach-1-extraction of articular surfaces from a closed stifle joint in large animal species.pdf mach-1-3-point or 4-point bending test (ma056-sop11-d v2) sim s and quenneville e biomomentum inc. laval (qc), canada, effective date: march 9th, 2016 purpose this procedure describes a standard method to realize a flexural (3-point and 4-point) bend test on a material sample using the mach-1 mechanical tester. scope this procedure can... read more ma056-sop11-d v2 mach-1-3-point or 4-point bending test.pdf mach-1 analysis-extraction of elastic model parameters following an automated indentation mapping (sw186-sop01-d v1) sim s and quenneville e biomomentum inc. laval (qc), canada, effective date: april 17th, 2015 purpose this procedure describes a method to extract elastic model parameters (instantaneous modulus, which is referred as the young's modulus in mach-1 analysis, and shear modulus) from mach-1 files generated during an automated... read more sw186-sop01-d v1 mach-1 analysis-extraction of elastic model parameters following an automated indentation mapping.pdf mach-1 analysis-extraction of thickness values following automated thickness mapping of an articular surface (sw186-sop02-d v1) sim s, lavoie jf and quenneville e biomomentum inc. laval (qc), canada, effective date: april 22th, 2015 purpose this procedure describes a method to extract the thickness of cartilage from mach-1 files generated during an automated thickness mapping of an articular surface (as per ma056-sop02-d). it also describes the creation of a... read more sw186-sop02-d v1 mach-1 analysis-extraction of thickness values following automated thickness mapping of an articular surface.pdf mach-1 analysis-extraction of mechanical parameters following unconfined compression (sw186-sop03-d v1) sim s biomomentum inc. laval (qc), canada, effective date: april 15th, 2015 purpose this procedure describes a method to extract mechanical parameters from mach-1 result files generated during an unconfined compression of a sample (e.g. an osteochondral core (as per ma056-sop03-d) or a disk (as per... read more sw186-sop03-d v1 mach-1 analysis-extraction of mechanical parameters following unconfined compression.pdf mach-1 analysis-extraction of the complex modulus components following dynamic mechanical testing (sw186-sop04-d v1) hadjab i and quenneville e biomomentum inc. laval (qc), canada, effective date: december 3rd, 2014 purpose this procedure describes a method for the extraction of the complex modulus components (young's (e' and e”) and shear (g' and g”) modulus) following dynamic mechanical testing performed as per... read more sw186-sop04-d%20v1%20mach-1%20analysis%20-%20extraction%20of%20the%20complex%20modulus%20components%20following%20dynamic%20mechanical%20testing.pdf mach-1 analysis-extraction of mechanical parameters following confined compression (sw186-sop05-d v2) lavallée ap and quenneville e biomomentum inc. laval (qc), canada, effective date: august 24th, 2015 purpose this procedure describes a standard method to extract mechanical parameters from a mach-1 result file generated during confined compression of a cartilage disk perform as per ma056-sop06-d. scope this... read more sw186-sop05-d v2 mach-1 analysis-extraction of mechanical parameters following confined compression.pdf mach-1 analysis-extraction of mechanical parameters following shear testing on a cartilage disk or an osteochondral core (sw186-sop06-d v1) lavallée ap biomomentum inc. laval (qc), canada, effective date: august 19th, 2015 purpose this procedure describes a method to extract mechanical parameters from mach-1 result files generated following shear testing on a cartilage disk or an osteochondral core as per ma056-sop07-d. read more sw186-sop06-d v1 mach-1 analysis-extraction of mechanical parameters following shear testing on a cartilage disk or an osteochondral core.pdf mach-1 analysis-extraction of mechanical parameters following friction testing on a cartilage disk or an osteochondral core (sw186-sop07-d v2) chartrand a and quenneville e biomomentum inc. laval (qc), canada, effective date: august 24h, 2015 purpose this procedure describes a matlab-based method to extract mechanical parameters from the mach-1 result files generated following friction testing on a cartilage disk or an osteochondral core as per... read more sw186-sop07-d v2 mach-1 analysis-extraction of mechanical parameters following friction testing on a cartilage disk or an osteochondral core.pdf mach-1 analysis-extraction of mechanical parameters following bending test (sw186-sop08-d v2) sim s biomomentum inc. laval (qc), canada, effective date: march 9th, 2016 purpose this procedure describes a method for the extraction of mechanical parameters such as the modulus of elasticity in bending (ef ) and the maximum flexural strength (?f ) following a flexural (3-point and 4-point bend) test... read more sw186-sop08-d v2 mach-1 analysis-extraction of mechanical parameters following bending test.pdf mach-1-hardness testing (ma056-sop12-d v1) gilbert n and quenneville e biomomentum inc. laval (qc), canada, effective date: december 9th, 2016 purpose: this procedure describes a standard method to realize an indentation hardness test on a material sample using the mach-1 mechanical tester. scope: this procedure can be applied on any type of... read more ma056-sop12-d v1 mach-1-hardness testing.pdf mach-1-lap shear testing (ma056-sop13-d v2) gilbert n and quenneville e biomomentum inc. laval (qc), canada, effective date: december 19th, 2016 purpose: this procedure describes a standard method to realize a lap shear test on an adhesive between two substrates using the mach-1 mechanical tester. scope: this procedure can be used for lap shear adhesion testing.... read more ma056-sop13-d v2 mach-1-lap shear testing.pdf mach-1 analysis-extraction of mechanical parameters following lap shear test (sw186-sop09-d v2) gilbert n and quenneville e biomomentum inc. laval (qc), canada, effective date: december 19th, 2016. purpose this procedure describes a method to extract mechanical parameters from mach-1 result files generated following lap shear testing on an adhesive between two substrates as per ma056-sop13-d. read more sw186-sop09-d v2 mach-1 analysis-extraction of mechanical parameters following lap shear test.pdf mach-1-flexion testing of needle-shaped samples (ma056-sop14-d v2) gilbert n and quenneville e biomomentum inc. laval (qc), canada, effective date: 26jan2018 purpose this procedure describes a standard method of performing a flexural bend test on a needle-shaped sample with a protruding head using the mach-1tm mechanical tester. read more ma056-sop14-d v2 mach-1-flexion testing of needle-shaped samples.pdf mach 1 analysis-extraction of mechanical parameters following flexion testing of needle-shaped samples (sw186-sop10-d v2) gilbert n and quenneville e biomomentum inc. laval (qc), canada, effective date: 16jan2018 purpose this procedure describes a standard method to extract the following mechanical parameters from a flexural bend test on a needle-shaped sample with a protruding head using the mach-1tm mechanical tester:... read more sw186-sop10-d v2 mach-1 analysis-extraction of mechanical parameters following flexion testing of needle-shaped samples.pdf indentation and thickness mapping of articular surfaces through manual positioning (protocol template aaax1 v1) biomomentum inc. laval (qc), canada, effective date: december 6th, 2016. purposebiomomentum李先生
First Previous [1] [2] 3 [4] NEXT